Loading 3D model...

Fan Panel, 3U — 92 mm, 7.5-inch

ParamTweaks

Title

€18

Description

A 3U fan panel for our 7.5-inch rack, for one centred 92 mm fan.

A 92 mm bore and its surrounding material fit the 160.6 mm field between the mounting slots. Two 92 mm fans cannot fit that field; the wider 10-inch panel supports two.

The 190.5 × 133.35 mm panel prints as one piece. Choose the guard rings and spokes, or leave the guard off.

In the box: the panel and four fan screws. You supply the fan.

Related Products

A 1U fan panel on a 190.5 mm plate for three 40 mm fans — all it will take — each bore under a printed ring guard

View Design →

Fan Panel, 1U — 40 mm, 7.5-inch

A 2U fan panel for two 80 mm fans, printed as ONE plate with no seam between the bores

View Design →

Fan Panel, 2U — 60 or 80 mm, 7.5-inch

A 1U fan panel for three 40 mm fans: round bores, each under a printed ring guard

View Design →

Fan Panel, 1U — 40 mm

A 3U fan panel for two 92 mm fans, printed in two halves that lap between the bores

View Design →

Fan Panel, 3U — 92 mm

A top panel vented with 5 mm hexagons on 8 mm centres: the lid, 190.5 mm across the rack and 195 mm deep, printed in one piece

View Design →

Top Panel, 7.5-inch

A 2U fan panel for two 80 mm fans, printed in two halves that lap between the bores

View Design →

Fan Panel, 2U — 60 or 80 mm

A 1U blanking panel vented with 5 mm hexagons on 8 mm centres: 190.5 mm wide, three mounting holes each side

View Design →

Blanking Panel, 7.5-inch

A side panel vented with 5 mm hexagons on 8 mm centres: one whole 3U section of the rack flank

View Design →

Side Panel

A 1U badge panel wearing a name in raised letters, on a face vented with 5 mm hexagons on 8 mm centres and solid behind the lettering

View Design →

Badge Panel, 7.5-inch

A 1U blanking panel vented with 5 mm hexagons on 8 mm centres: 254 mm wide, three mounting holes each side

View Design →

Blanking Panel

A 7.5-inch 3U DC UPS mount with a single-piece bezel, four-bolt dock and removable carrier, on a floor vented with 5 mm hexagons on 8 mm centres

View Design →

UPS / SAI Shelf, 3U, 7.5-inch

A 7.5-inch 2U vertical board caddy with removable carriers and a single-piece bezel, on a floor vented with 5 mm hexagons on 8 mm centres

View Design →

Vertical Board Caddy, 2U, 7.5-inch

A 3U DC UPS mount with a four-bolt dock and removable OpenUPS2 carrier on a floor vented with 5 mm hexagons on 8 mm centres

View Design →

UPS / SAI Shelf, 3U

A 2U vertical board caddy with independent removable carriers on a floor vented with 5 mm hexagons on 8 mm centres

View Design →

Vertical Board Caddy, 2U

A 1U USB charger shelf: a fixed window for a row of ports, over a floor with strap inserts, vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates

View Design →

USB Charger Shelf, 1U, 7.5-inch

A 1U SBC tray with four mounting holes set to measured rectangular spacing on a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates

View Design →

SBC Universal Tray, 1U, 7.5-inch

A 2U PSU tray: a one-piece bezel with a window sized to the supply, over a floor vented with 5 mm hexagons on 8 mm centres, with two straps, with front insert seats inside the end plates

View Design →

PSU Tray, 2U, 7.5-inch

A 2U PSU mount: a one-piece bezel bolted for an SFX supply, with a window for its fan and inlet, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates

View Design →

PSU Mount, 2U, 7.5-inch

A 1U Raspberry Pi Zero cluster tray: two rows of two boards on a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates

View Design →

Raspberry Pi Zero Cluster Tray, 1U, 7.5-inch

A 2U Raspberry Pi blade tray: boards standing on edge between comb fins, each with its own bezel window, over a floor vented with 5 mm hexagons on 8 mm centres, with front insert seats inside the end plates

View Design →

Raspberry Pi Blade Tray, 2U, 7.5-inch

A 2U NUC shelf: a one-piece bezel with a front window, over a floor vented with 5 mm hexagons on 8 mm centres, with two straps, with front insert seats inside the end plates

View Design →

NUC Shelf, 2U, 7.5-inch

A 1U meter panel: a flat plate with 48 x 29 mm cutouts for panel-mount volt and amp meters, up to three across

View Design →

Meter Panel, 1U, 7.5-inch